
On the File menu choose the Configuration option, this will open the
configuration dialog.
Select the GPS tab.
Select the GPS Make as
Magellan
Select the GPS Model as
Magellan USB
. The GPS parameters can be adjusted to
match the specifications for the model of GPS (refer to the GPS manual for this).
Set the
GPS Upload/Download Datum
to WGS 84.
Select the
COM tab
on the Configuration dialog.
Set the
Com Port
number. (It will be configured as a modem in Windows -
try
COM3 but it may be different on your PC)
Set the
Parity
to None.
Set the
Stop Bits
to 1
Set the
NMEA Baud Rate
to 115200.
The
Use PVT for Garmin instead of NMEA
Checkbox is ignored.
The
Serial Port Driver
should be set to Driver 2 (this is the default)
Auto Pilot Output settings can be ignored.
Configuring a Magellan Explorist for use by OziExplorer
For the Explorist and OziExplorer to communicate the correct communication mode must be
specified in the Explorist, this is done by using the Communications Menu.
To get to the Communication Menu press the
Menu button
, select the
Adv. Features
option, select
the
Communications
option
A new menu appears which has the following options.
File Transfer
Used for transferring data between the PC and the Explorist. The Explorist is seen as a disk drive by
the PC. OziExplorer requires this mode for transferring waypoints and tracks.
NMEA Data Comm
To use NMEA Data Comm mode a driver must be installed on the PC, the driver is provided on the
CD provided with the Explorist. The supplied driver may not work with Vista but a Vista driver is
available on the Magellan web site.
The Explorist outputs NMEA data. OziExplorer requires this mode for moving map (real time
OziExplorer Help Contents
Comentarios a estos manuales